The individual 5 kW module can be scaled with system power and communication connections up to 12 units (master + 11 slaves). This increases the storage capacity up to 60 kWh, but the resulting output power and voltage remain the same - 5 kW /48V at the master output. Parallel interconnection of masters is not supported by the software.
| Brand: | ELERIX |
| Model: | EX-S5 |
| Type: | N/A |
| Capacity: | 100 Ah |
| Size: | 600 x 342 x 207 mm |
| Weight: | 49 kg |
| Nominal voltage: | 51.2 V |
| Operational voltage: | 48V - 57V |
| The maximum charging voltage for initial charge: | |
| Maximum discharge current: | 100 A |
| Peak discharge current: | 125A |
| Operating temperature (discharging): | -15 up to 55°C |
| Operating temperature (charging): | -15 up to 55°C |
| VDA: | |
| Energy density: | 104Wh/kg |
The battery is capable of powering a load and/or being charged via either power output (the outputs are connected in parallel internally). Using an integrated BMS, these outputs are regulated by a power semiconductor element. The state of charge is indicated on the LED indicator. The outputs are protected against short circuit by a 200A solid-state fuse (integrated).
Via the CAN communication port, the battery can be connected to the Cerbo communication module and the following values can be read out in the VRM portal:
| Weight (kg) | 49 |
| Height (mm) | 600 |
| Width (mm) | 342 |
| Depth (mm) | 207 |
| Nominal Voltage (V) | 51.2 |
| Capacity (Ah) | 100 |
| Max discharge current (A) | 100 |
| Optimal discharge current (A) | 80 |
| Max charging current (A) | 100 |
| Optimal charging current (A) | 50 |
